Scrap Shotz Snap Shotz: November Kit Projects Part 2 with Katelyn

Hey Scrap Shotz Fans!

Today, I'm back and sharing with you two more projects that I created using the beautiful November Kit which features the Amber Moon Collection designed by Frank Garcia for Prima Marketing. This line is filled with beautiful fall colours perfect for all your fall projects.

To kick off my projects, I created a pretty card using one of the 3"x4" cards and some chipboard pieces to create the focal points on my card.

For the focal point of my card, I layered the chipboard wreath overtop of the wreath that is on the 3"x4" card. To highlight the bottom right hand corner of the wreath, layer a few other chipboard elements. To cover up the "welcome" tittle on the bottom of the card, layer a sticker from the Word Stickers. You'll need to cut the word banner down to fit. To the left of the word banner, add a few coordinating jewels. Because a card can never enough a bling, right?!

To add some interest in the top left hand corner of the card, I fussy cut out one of the butterflies from the 3"x4" cards and used foam squares to adhere it to the left of the wreath.

For my last project, I created a pretty Give Thanks Home Decor piece using some of my leftover pieces from creating my projects. I have a tutorial for you on how to create my home decor piece below so that you can recreate it for your home.

To start, pull out the large Vignette Box by Tim Holtz. Ink the top edges of the box using Gathered Twigs Distress Ink and a blending tool.

Cut the striped 3"x4" card out as well as the "Give Thanks" 3"x4" card out. Trim the "Give Thanks" card down to 2 5/8" x 3 7/8". Distress the edges of each card using an edge distressor. Ink the edges of each card using Gathered Twigs Distress Ink and a blending tool with foam.

From the borders paper, cut two different borders out. Trim one border down to 3 1/2" and cut the other border down to 3 1/4". Distress the edges of each border using an edge distressor. Ink the edges of each border using Gathered Twigs Distress Ink and a blending tool with foam.

Cut a piece of the wood paper to 3" x 4 1/4". Distress the edges of the paper using an edge distressor. Ink the edges of the paper using Gathered Twigs Distress Ink and a blending tool with foam.

From the striped paper, cut one piece that measures 3 1/2" x 5 1/8". Cut a second piece that measures 4 7/8" x 3 1/4". Distress the edges of the papers using an edge distressor. Ink the edges of the papers using Gathered Twigs Distress Ink and a blending tool with foam.

Pick out two leaves.

Adhere the cream side of the smaller striped paper piece to the striped paper piece. Adhere the wood paper piece to the cream patterned paper piece. Adhere the first border 1/2" from the bottom of the striped paper. Adhere the second border 1/4" overtop of the first border.

Adhere the "Give Thanks" card to the striped card. Use foam squares to adhere the striped card to the wood paper.

Take one of the square stickers from the word stickers and cut it in half. Ink the edges using Gathered Twigs Distress Ink and a blending tool with foam. Adhere one of the sticker halves in the bottom right hand corner of the patterned paper. Adhere the other half of the sticker in the top left hand corner of the patterned paper.

Adhere the large striped patterned paper piece to the inside of the Vignette Box.

In the bottom right hand corner of the "Give Thanks" card, adhere the two leaves, the puffy pumpkin sticker, the chipboard coffee cup, the "blessed" chipboard piece, a fussy cut butterfly and a chipboard butterfly. Use foam squares were desired.

In the bottom right corner, add a few of the coordinating jewels. In the top left hand corner of the "Give Thanks" card, foam square the puffy sticker butterfly close to the g.